ElectrIQ AIRCUBE Uživatelský manuál stáhnout pdf (Strana 3)

Yamatake Corporation No. SS2-MVC200-0100 (Rev.1)

- 3 -

Installation specifications

Pressure limits: 0.05 to 0.98 MPaG (remote type: 0.05 to 0.9 MPaG)

Ambient temperature limit: -15 to 50°C

Ambient humidity limit: 5 to 95% RH

Electrical conduit: G1/2 (3 ports)

Installation: Detector/Converter integral type, Wall mounting, 2-inch pipe mounting

Grounding:

The most effective grounding method is direct connection to earth ground with minimal impedance. Grounding resistance

lower than 100 Ω.

Weight: 9 kg (50 mm), 11 kg (65 mm), 13 kg (80 mm), 18.5 kg (100 mm), 39.5 kg (150 mm)

Straight pipe lengths: The minimum straight pipe length

Function

Totalized function

Counting by one count according to the display flow unit setting.

Auto ranging function

After turning on the power or the peak value is reset, the AIRcube automatically sets the measuring range at 80% of the

maximum flow rate.

Leak check function

Calculate the leak rate by measuring line pressure with a built in pressure sensor.

Upstream side L

Down-

stream

side L

All the joints

shown to the left

One 90° bend Two or more 90°

bends on a single

plane

Two or more 90°

bends not lying on a

single plane

Reducer Expansion pipe Sluice valve

(fully open)

0.5 1.5 4.0 2.5 1.5 2.5 0.6

Multivariable mass

flow meter

Multivariable mass

low meter

Multivariable mass

low meter

Multivariable mass

flow meter

3.5 D

Multivariable mass

flow meter

0.75D

Multivariable mass

low meter

100%

Normal operation

Pressure

Time

Pipe and valve shut.

Setting pressure of compressor

Compressor stopped.

70%

Compressor start.

80%

Flow rate =

100

(t1 + t2)

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

ElectrIQ AIRCUBE Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Split-systém klimatizace ElectrIQ AIRCUBE